1) while using E-Logbook, for every fault, please use 2 events ( one for fault description with start time & other for corrective action with the time). Also put proper timings, so the time lost due to that problem will be logged. 2) For Quench Antenna (LQA): Compensation (IAP@cold) is not needed. 3) Don't sign for stripping/standby before WP07/WP17. 4) When we change the polarity switch position, do "LOCK" the position with key. 5) Ensure that all voltage taps are removed before launching HV test. 6) If C11 connector is not found good, generate NC (sign for standby). Regards, Ajay.Kasbekar